If you leave your tools out in the open for an extended period, then even the best rust-resistant coating in the world won’t save them from harm. The good news is that inexpensive materials and modular construction have now made it easy and affordable to build a tool shed.
By constructing a tool shed, you can create a clean, dry and secure place from where you can easily access your tools. Also, if you use cedar to construct the shed, then the shed will be naturally resistant to rot. This means that the shed will protect your tools from both pests and precipitation. Here, we will provide you with all the details about how to build a tool shed. Let’s get started.
Some Tips for Getting Started with the Construction of a Tool Shed
Before we reveal how to build a tool shed, we want to provide you with some useful tips for getting started with the tool shed construction. First and foremost, you should that this is a simple and low-cost construction. You can build the parts for the construction in your garage and assemble them with your own bare hands.
Another reason for the low overall cost of this construction is that it involves modes finishes like fiberglass shingles, composite trim, and OSB siding which are not that costly. Also, since it is easy to build and assemble the shed with your own hands, you can save hundreds of dollars that you would have otherwise spent on labor.
The wood platform foundation and the modular construction of the shed mean that it can be constructed virtually anywhere including on sloping or remote sites. A tool shed has a simple constriction that only requires a circular saw and standard carpentry tools. If you can get a friend or family member to help you with the construction, then you can get the shell and platform ready in two to three days. It will take another couple of days to complete the windows, roofing, doors, trim, and siding to build the shed.
Whether or not you will need a permit for the shed will depend on how it is constructed and the materials you’ve used. We recommend getting in touch with your local building department to find out if you require a permit for the tool shed or not. The last bit of advice that we will give is to choose an appropriate location for the shed. This is important for building a stable shed that can provide the right amount of protection to your tools. We can now start with the step-by-step guide to build a tool shed.
The Items to Gather
The first and foremost thing you need to do to build a shed for your tools is to gather everything that you will need to construct the shed. Following is a list of items that you will need for building the tool shed:
- Three 2×4 frames
- Plywood shelves
- Tongue-and-groove cedar boards
- Wood glue
- 2×6 header
- 1×2 lumber
- 1×3 strips
- Circular saw
Once you have gathered the above-mentioned items, you can start to construct the tool shed. The first step to do that would be assembling the framing.
1. Assemble the Framing
The three 2×4 frames will have to be built by you
- Make sure the frames you create have a center crosspiece and a top that is angled
- Once the frames are created, connect them at the top and bottom’s front and back
- Nail the 1×2 lumbers around the openings of the door at the framing’s front side
- Take the 2×6 header and glue it across the front using the wood glue. Screw the header as well to ensure it sticks properly
- The frame is assembled
2. Build Floor and Shelves
Once you have assembled the framing, the next step would be to build the floor and shelves. Following are the steps to do that:
- Cut a plywood piece that can fit into the framing’s base. To allow the piece to align with the 1×2 lumbers in the front, let a ¾-inch be overhung
- Level the plywood to allow it to fit around the framing. Use glue and screw to set the plywood in place
- Provide the needed support to the shelving by screwing crosspieces into the middle
- After it is cut, screw down the plywood shelving
3. Slide the Shed
After you’ve built the floor and shelves, the next step would be to slide the shed. Following is how you need to do that:
- Using nails, connect the frame’s exterior with the tongue-and-groove cedar boards. Connect the boards to the exterior on the back and sides
- Use a circular saw to cut the boards’ top edges flush with the framing
4. Attach the Roof
Once the shed has been slid, you can start to attach the roof. Following are the steps to do that:
- Using nails, connect the top of the frame with tongue-and-groove cedar boards
- Overhang the roof on the front and sides
5. Build and Hang the Doors
The fifth and final step to build a tool shed involves building and hanging the doors. Following are the steps to do that:
- To get the doors to fit below the header, cut them to the height of the doors
- To hold the 1×3 strips together, screw them across the back
- Next, attach each door’s frame with a 1×3 frame
- Using heavy-duty hinges, attach the doors to the shed
Congratulations! You’ve just learned how to build a tool shed where you can store all your tools and keep them safe from any damage.