A3 · Woodworking calculator
Linear Metre & Stock Length Calculator
Add repeated lengths for battens, edging, trim, skirting or rails. The calculator checks how many equal pieces fit into each stock length instead of relying on total metres alone.
Free to use · no account needed · calculations stay in this browser · formula reviewed 4 September 2026
Use this for equal repeated pieces
The calculator first checks how many finished pieces fit into the usable stock after end trim and kerf. It also checks that the usable stock covers the entered percentage allowance, then uses whichever requirement is larger.
End trim is removed from each end before any piece is fitted, and no extra kerf is added at those ends. Include the material consumed by end squaring in the trim value. The fit calculation counts n − 1 kerfs between n pieces; a final offcut-separation cut may consume another kerf, so reserve that material physically in the remaining stock or in your trim allowance.
This is not a mixed-length cutting optimiser. Check defects, angled ends, machining allowances and the real cut order before buying or cutting.
Worked example
Twelve 850 mm pieces total 10.20 m. With 10% extra length the planning total is 11.22 m. A 2400 mm length with 10 mm trimmed from each end holds two 850 mm pieces after one 3.2 mm kerf, so six stock lengths are needed, not five.
Is the percentage allowance bought on top of the fit result?
No. The calculator uses whichever needs more stock: the piece fit or the planned length with allowance. The allowance requirement is divided by the usable length after end trim, not the full stock length. In the example, six lengths give 14.28 m of usable stock, which already covers the 11.22 m planned length; the two stock requirements are not added together.
Linear materials schedule
| Profile | Piece length | Qty | Stock |
|---|---|---|---|
| ________ | _____ mm | ___ | _____ mm |
| ________ | _____ mm | ___ | _____ mm |